SiComponents Forums

Hi,

when opening the attached RC, I get an "Error ID:0 - Range chdeck erro". That message seems to be not documented in the HLP and I don't know what the problem is. The RC has been extracted from an EXE with ResourceHacker and I edited a few strings, but did not change the structure, so I have no idea why this should go wrong.

Any comments appreciated

Michael

---------------
1 VERSIONINFO
FILEVERSION 0,9,1,0
PRODUCTVERSION 0,9,1,0
FILEOS 0x4
FILETYPE 0x2

{
BLOCK "StringFileInfo"
{
BLOCK "040904B0"
{
VALUE "CompanyName", "Michael Baas"
VALUE "FileDescription", "Application to create/modify Outlook-mails and attach file(s)/recipient(s)"
VALUE "FileVersion", "0,9,1,27"
VALUE "InternalName", "MAILY"
VALUE "LegalCopyright", "Copyright (C) 2004"
VALUE "LegalTrademarks", ""
VALUE "OriginalFilename", "MAILY.EXE"
VALUE "ProductName", "MAILY"
VALUE "ProductVersion", "0,9,1,27"
VALUE "OLESelfRegister", ""
}
}

BLOCK "VarFileInfo"
{
VALUE "Translation", 0x0409 0x04B0
}
}

Can you tell us what exactly version number do you use? Have you downloaded it from our site? Have you checked the latest version available from our site?

I am using 2.1.0.3, downloaded from your site, still 28 days left in evaluation period

Michael

Please try to download latest version from our site (2.1.1) and check if this error gone. This shall be fixed.