Hi
just downloaded the 6.4.0 version of tsiLang.
Closed delphi, went to add/remove programs and removed the 6.3.1 version.
After removal I installed version 6.4.0.
It is now in the add/remove section as "Remove tsiLang version 6.4.0".
But when I am "inside" Delphi 5 and looks at the version in help/About it is still 6.4.0
Am I doing something wrong here ?
Micahelk
Version number not changing
Hello,
Do you mean that version number in about box is still 6.3.1? If so, then it means that there were left some TsiLang_D5.BPL somewhere on your PC (most likely in Delphi 5\Projects\BPL). Please uninstall version 6.4, delete all TsiLang files includeing BPL that might be left on your PC and re-install the latest version. Please let us know if this helped.
Do you mean that version number in about box is still 6.3.1? If so, then it means that there were left some TsiLang_D5.BPL somewhere on your PC (most likely in Delphi 5\Projects\BPL). Please uninstall version 6.4, delete all TsiLang files includeing BPL that might be left on your PC and re-install the latest version. Please let us know if this helped.
Best regards,
Igor Siticov.
Igor Siticov.
Uninstall in Delphi5, Uninstall in control panel, deleting every file regarding TSI, installing once agian - Now all is 6.4
But - now the routine that looks through the PAS file to extract strings has been running for at least an hour now.
Its showing information like:
"Found strings so far: 1290"
1290 is SLOOOOWLY increasing.
This took some 3 minutes before updating!
But - now the routine that looks through the PAS file to extract strings has been running for at least an hour now.
Its showing information like:
"Found strings so far: 1290"
1290 is SLOOOOWLY increasing.
This took some 3 minutes before updating!
I have already.
Doing this on a units (My UMain.Pas which its 32400 lines long and contains some 2000 strings) takes some 20 minuttes.
I have other forms with are just as big. Same problem.
I also have smaller ones - With only some 40 strings. No problem here.
Its like counting up to the first 200 goes pretty fast - After that it Really slows down.
Besides that - It works now. Linenumbering works, which it didnt before
Doing this on a units (My UMain.Pas which its 32400 lines long and contains some 2000 strings) takes some 20 minuttes.
I have other forms with are just as big. Same problem.
I also have smaller ones - With only some 40 strings. No problem here.
Its like counting up to the first 200 goes pretty fast - After that it Really slows down.
Besides that - It works now. Linenumbering works, which it didnt before
I just tried uninstalling it all again and reinstall version 6.4.
That didn't help.
When I uninstall I first go to D5 and remove the comp.
I then close D5.
I go to controlpanel and via add/removeprogram removes TSI.
I manually deletes every file called something like TSI*.*
I restart the machine.
I start D5 to see that it is gone.
I close D5.
I install TSI.
I installs successfull.
After installation I start D5.
At this point TSI is installed but not active.
I go to components. Here I can see the TSI but no check mark.
When setting the checkmark I get an error (Something with TsiLang_D5r.dpk).
I then remove TSI.
Then I open
TsiLang_D5r.dpk, press compile.
After this I open
TsiLang_D5.dpk, press compile and press install.
Herefter TSI is available and working.
But working very very slowly
Micahe
That didn't help.
When I uninstall I first go to D5 and remove the comp.
I then close D5.
I go to controlpanel and via add/removeprogram removes TSI.
I manually deletes every file called something like TSI*.*
I restart the machine.
I start D5 to see that it is gone.
I close D5.
I install TSI.
I installs successfull.
After installation I start D5.
At this point TSI is installed but not active.
I go to components. Here I can see the TSI but no check mark.
When setting the checkmark I get an error (Something with TsiLang_D5r.dpk).
I then remove TSI.
Then I open
TsiLang_D5r.dpk, press compile.
After this I open
TsiLang_D5.dpk, press compile and press install.
Herefter TSI is available and working.
But working very very slowly
Micahe