Hi,
I have 35 forms (units) I implemented the TsiLang Component, but only 25 are shown in the TsiLang-Expert. I filtered out this missing forms by name, all forms are in the project-file, all have the TsiLang, I found no differences and on all missing forms I can call the SIL-Editor.
Hope of an idea?
X-mas form germany
markus
Missing Forms in the Expert
Hi,
In most cases this problem is caused by missing {FormName} in project file. Entries in DPR for the form must look like this:
Please let us know if this helps.
In most cases this problem is caused by missing {FormName} in project file. Entries in DPR for the form must look like this:
Code: Select all
UnitName in "UnitName.pas" {FormName},
Best regards,
Igor Siticov.
Igor Siticov.
Hi,
yes it works now, but I checked all project files and all relevant units source code and found only one differenz in one unit. I open and close the expert nothing changed in the expert, I close delphi nothing, after closing and reoping then it works. Reason -in my opinion- not logical,
BUT it works.
Many Thanks for help and supporting!
I work with V 6.0.2
Markus
yes it works now, but I checked all project files and all relevant units source code and found only one differenz in one unit. I open and close the expert nothing changed in the expert, I close delphi nothing, after closing and reoping then it works. Reason -in my opinion- not logical,
BUT it works.
Many Thanks for help and supporting!
I work with V 6.0.2
Markus
Markus
www.velumng.com
www.velumng.com
I am having exactly the same issue. The project file has the correct code ( uSpaWizard in 'uSpaWizard.pas' {frmSpaWizard},) and the frmSpaWizard has a TsiLang Component which links to a TsiLangDispatcher on the main form. However when I open the sib file in the expert, TfrmSpaWizard is still missing.
Can you please help?
Many thanks.
Can you please help?
Many thanks.
I actually meant double clicking on the sib file itself. I forgot about the Tools menu. I have made changes to the sib file by double clicking on it in Explorer, is there any way to get these changes into the Expert (under tools) without overwriting any entries that may have been made by double clicking on the TsiLang components?
Thanks in advance.
Thanks in advance.
This means th problem is not the same as this forum topic. The situation you described means that you just didn't save (export) TfrmSpaWizard to this SIB file. You can just save this form (export translations) to this SIB file. All other forms in SIB file will be left untouched.
Best regards,
Igor Siticov.
Igor Siticov.